New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows San Antonio pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Door Replacement Across Converse
Door replacement in Converse, TX typically costs $450 to $1,800 per opening for interior doors and $900 to $4,200 for exterior entry systems, depending on material, glass, and wind-load requirements. Most jobs we handle are done in a single day once the door is on hand. The catch in Converse: exterior doors have to clear a specific wind-pressure code threshold before the city will sign off, and a surprising number of cheap quotes skip that step entirely.
We’re Juniper Windows San Antonio, and our crews run jobs across Converse every week, from the subdivisions around Kitty Hawk Road down to the newer pockets east of Loop 1604. We know which doors pass inspection here and which ones end up getting pulled out after a failed final. If you’re pricing a replacement, call us at (903) 488-7019 and we’ll give you a written number before anything gets ordered.
Why Juniper Windows San Antonio Is Converse’s Preferred Door Replacement Company
We’ve spent more than two decades inside Converse homes, and the pattern is easy to spot: houses built between 1990 and 2010 are hitting replacement age all at once. Builder-grade slabs are warping. Sidelight seals are fogging. And after every hailstorm, homeowners discover their original door never carried an impact rating at all. That’s the work we do, and Converse customers keep our calendar full because we show up with the right product and a written price, not a vague estimate that swells at the door.
Our team, led by Sean Mackey, runs background-checked, uniformed techs on every job. When you book with us, you get a live arrival time you can track, before-and-after photos of the opening, and a digital invoice you can pay from your phone. No four-hour windows. No “the crew got held up” voicemail tag. Just a real person answering the phone 24/7 and a crew that treats your door like it’s the only job we have that day.
Converse homeowners also know this: every installation is covered by our 365-Day Done Right Promise. If something isn’t right within a year, we fix it, parts and labor, in writing. No charge, no argument, no callback queue. That guarantee applies to every door we hang in Converse, whether it’s a hollow-core bedroom slab or a hurricane-rated front entry.
Interior Door Replacement in Converse
Interior Door Replacement in Converse covers removing an old slab, prepping the existing jamb, and hanging a new door that actually fits the rough opening. Most Converse homes from the 1990s and 2000s were built with hollow-core masonite doors that chip at the bottom, split at the hinge screws, and start dragging on carpet after the foundation settles. When that happens, replacing the slab is faster and cheaper than chasing the frame with a planer.
Interior door replacement in Converse runs $450 to $900 per opening for a standard 30-inch hollow-core or solid-core slab, including hinges, knob prep, and disposal of the old door. Pre-hung interior doors, where we replace the jamb and casing as well, land in the $700 to $1,300 range per opening. Homes in neighborhoods like Meadowood and Escondido North tend to have six-panel builder doors with casing that’s been painted six times, so when the slab fails, the trim often comes out too.
Slab-Only Swaps
A slab-only swap makes sense when the existing jamb is still square and solid. We template the old hinges, mortise the new slab to match, bore for the knob and latch, and hang it in under two hours. This is the most common interior door job we do in Converse, and it costs the least.
Pre-Hung Replacements
When the jamb is split, the casing is cracked, or the rough opening has shifted out of square, a pre-hung unit is the honest fix. We pull the old frame, shim the new one level and plumb, insulate the gap, and trim it out. Worth the extra money if you’re planning to keep the house.
Interior Door Installation in Converse
Interior Door Installation in Converse usually means new construction or a fresh opening: a closet that never had a door, a pantry getting a proper swing door, or a hallway needing privacy where there was just an archway. We frame the rough opening if needed, install the pre-hung unit, case both sides, and leave it ready for paint or stain. Converse homes built in the 2000s often have odd-size openings (28-inch and 32-inch widths are common), so measuring before ordering matters more than people expect.
New interior door installation in Converse runs $650 to $1,800 per opening, depending on whether we’re building a new wall opening or dropping a pre-hung into existing framing. Solid-core doors, glass-panel French doors, and barn-door hardware push toward the higher end. Most jobs are done same day, door and trim included.
Closet and Pantry Doors
Sliding bypass doors, bifold panels, or a single swing door: we stock and order all of them for Converse homes. Bifold replacements are the quickest and cheapest, usually $650 to $850 per opening, and the track hardware we use doesn’t sag after two years.
French and Glass-Panel Interior Doors
If you’re opening up a home office or dining room, glass-panel French doors run $1,200 to $1,800 installed. We order them with tempered glass as standard, so they meet code without anyone having to think about it.
Trusted Brands We Service in Converse
We’re not locked to one catalog. Our Door Replacement team installs and services Therma-Tru entry systems, Mr-Glass interior and patio units, ViewLux hinged and sliding doors, and ECO Window Systems impact-rated openings. Because we run jobs across Converse and the greater San Antonio area every week, we keep a deep stock of local parts: hinges, thresholds, sweeps, astragals, and strike plates. That means a door ordered for a house off FM 1516 isn’t sitting in a warehouse two states away. It’s on a truck, with a crew, headed to your address.
Common Door Replacement Problems We See in Converse Homes
- Wind-load failures on exterior openings. Converse adopted 2018 IRC wind provisions, which require exterior door assemblies to resist a 25 psf design pressure. A door with a stamp below that fails inspection, plain and simple. We see this all the time after handyman installs.
- Hail-cracked glass in entry doors and sidelights. South Texas storms throw stones the size of golf balls. The white chalk marks on doors after a storm? That’s an insurance adjuster circling impact damage. If the glass isn’t impact-rated, the next storm does the same thing again.
- Warped slabs from humidity swings. Converse summers alternate between triple-digit heat and evening thunderstorms. Cheap hollow-core doors swell, bind, and stop latching. Solid-core or composite slabs hold their shape.
- Rotted jambs at the sill. Homes built in the 1990s and early 2000s around Converse often have wood jambs sitting directly on concrete slabs. No sill pan, no flashing. Twenty years of sprinkler overspray and rain splash later, the bottom of the jamb crumbles when you lean on it.
Pricing for Door Replacement in Converse, TX
A straight interior slab replacement in Converse runs $450 to $900 per opening. Pre-hung interiors land at $700 to $1,300. Exterior entry doors start around $900 for a basic steel unit with no glass and run to $4,200 for a full impact-rated Therma-Tru or ECO system with a laminated glass interlayer and HVHZ hardware. What drives the spread: glass inserts, sidelights, wind-pressure ratings, and whether the existing jamb is worth saving. Every quote we write in Converse is a fixed number, in writing, before any work starts. Call (903) 488-7019 and we’ll price your openings honestly.
We Also Serve Cities Near Converse
Our crews cover the San Antonio metro from Converse outward. We run Door Replacement in Converse daily, and we also serve San Antonio and Floresville with the same written-price guarantee and 365-Day Done Right Promise. Same crews, same live arrival tracking, same product lines.
Serving Converse, TX - Our Local Coverage Area
We’re based in the Converse area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Converse
Every exterior door assembly in Converse must carry a design pressure rating of at least 25 psf for components and cladding, per the 2018 IRC wind provisions the city adopts. That rating has to be listed on a Florida Product Approval or Miami-Dade NOA document matched to the exact door, glass package, and hardware you’re installing. A door without that paper trail fails final inspection, and you’ll be pulling it out and starting over. Call (903) 488-7019 and we’ll show you the compliance documents before you buy anything.
Yes, many Converse homeowners get a premium discount after installing an impact-rated entry door, but only if the opening is documented properly. That means the product approval numbers, the installation photos, and the final passed inspection all have to match. We file a wind mitigation form for every exterior door we replace in Converse, so your insurer has what it needs to apply the credit. Exact discount amounts vary by carrier, but the documentation is the part we handle.
For interior doors, yes. For exterior doors, usually not. The 25 psf wind rating applies to the entire assembly: slab, jamb, hinges, lock, and anchoring. If the old jamb has any rot at the sill, or the frame isn’t anchored to the rough opening at the spacing the code requires, a slab swap won’t pass. We’ll tell you honestly whether your jamb is worth keeping, and we’ll put that assessment in writing before you spend a dollar.
They fare dramatically better than standard tempered or annealed glass. Impact-rated doors use a laminated glass interlayer that holds the pane together even when a hailstone cracks the outer layer. The glass may show damage, but it won’t shatter into your entryway, and the door keeps its structural integrity. It’s the same reason these assemblies carry the Florida Product Approval labels Converse code requires. If you want a ballpark on cost for your specific opening, call (903) 488-7019 for a free, written estimate.
You need three things: the product approval document (Florida Product Approval or Miami-Dade NOA) matching your exact door, photos showing the installation from rough opening to finished trim, and the city’s passed inspection record. We hand you all three after every exterior door replacement in Converse. No digging through a file drawer, no calling the permitting office yourself. We put it in your hands the day the job closes.
Written by Sean Mackey, Owner at Juniper Windows San Antonio, serving Converse since 2001.
Six Reasons Homeowners Choose Juniper Windows San Antonio
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.