Door Replacement in Kirby - Free In-Home Measure, Written Price

Fast, Reliable Door Replacement Across Kirby

Door replacement in Kirby, TX typically runs $450 – $2,800 depending on whether we’re swapping an interior slab or reframing an exterior opening. Most Kirby jobs are completed in one day, with exterior pre-hung units sometimes taking two when stucco repair or threshold rebuilds come into play. We’re the Kirby door team that shows up with a live arrival time, a written price before work starts, and techs who know exactly what hides behind a 1960s ranch home’s original door casings. Call (903) 488-7019 to schedule your free estimate.

Call (903) 488-7019

Kirby’s housing stock was largely framed between the 1950s and 1970s, which means the door openings we open up rarely match what a modern pre-hung unit expects. That’s not a problem if you know it’s coming. It’s a problem if the installer discovers it mid-job and suddenly the price moves. We inspect first, write allowances into the contract, and price any surprise in writing before we touch a hinge.

Our Door Replacement crews serve Kirby from the San Antonio office, dispatched with the parts and framing lumber most Kirby jobs actually need on the truck. We know Ackerman Road ranches, the brick-veneer homes off Binz-Engleman, and the older stock near FM 78. That local familiarity means fewer return trips and fewer “we’ll have to order that” conversations.

Why Juniper Windows San Antonio Is Kirby’s Preferred Door Replacement Company

Kirby homeowners keep calling us back for one simple reason: we write the price down before we start, and we stand behind the work for 365 days, parts and labor, in writing. That’s the 365-Day Done Right Promise. If the door isn’t right, we make it right. No charge, no argument.

Every Kirby job gets a background-checked, uniformed technician. You’ll know exactly who’s walking up the driveway, and you’ll have a live arrival time on your phone the same way you’d track a ride. Before-and-after photos are standard, not an upsell. We answer the phone with a live person 24/7 because nobody should have to leave a voicemail to ask why their front door won’t latch anymore.

Sean Mackey leads the team, and his standing rule for Kirby work is that no wall gets opened without a plan for what we might find. Rotted jambs, out-of-square rough openings, corroded thresholds – these are common on Kirby’s older ranch homes, and they’re all priced into the contract as allowances before the first hinge is pulled. If the surprise is small, we handle it. If it’s structural, you approve the number in writing first.

Interior Door Installation in Kirby

Interior door installation in Kirby usually means replacing hollow-core slabs with solid-core or molded-panel units in homes where the originals have warped, split, or simply never closed right. Most Kirby ranches from the 1950s through 1970s were trimmed with hollow-core doors that were light and cheap. After 50 years of South Texas humidity, they swell in summer and rattle in winter. Typical slab replacement runs $450 – $900 per door installed, while full pre-hung units with new jambs land in the $700 – $1,400 range when the rough opening needs correction.

Slab Swaps vs. Pre-Hung Units

If the existing jamb is square and solid, we can hang a new slab on the old frame and save you real money. If the jamb has rotted at the bottom or the opening has settled out of square, forcing a slab in is a mistake. We’ll tell you which situation you have, show you photos, and price both paths before you choose.

Kirby’s Narrow Wall Depth Problem

Many Kirby homes were framed with studded walls barely 3.5 inches deep. That’s too shallow for a standard modern pre-hung interior door, which assumes a 4-9/16 inch jamb width. We routinely shim and trim jambs to fit older Kirby walls rather than forcing a fit that leaves the casing proud of the drywall.

Door Installers in Kirby

Door installers in Kirby do more than hang a door on hinges. The real work on these older homes is in the rough opening: checking the header, measuring for rack, inspecting the bottom plate for rot, and correcting whatever’s out of true before the new unit goes in. A door installed square will close cleanly for decades. A door forced into a crooked opening will fight you every season. Typical full-frame exterior door installation in Kirby runs $1,200 – $2,800, with the reframe work driving the upper end of that range.

Exterior and Patio Door Replacement

Kirby patio doors take a beating from heat and humidity. Aluminum units from the 1960s and 70s corrode at the threshold where concrete stoops hold water. The track gets gritty, the rollers fail, and the door becomes a permanent air leak. We pull the old unit, repair or reframe the opening, and install a modern weather-stripped door with low-E glass that actually seals.

Threshold and Jamb Repairs

When the bottom of a Kirby front door frame is rusted or rotted but the rest of the unit is sound, we can often replace just the threshold and the lower jamb legs. That’s a $350 – $700 repair instead of a full replacement. The catch is that you have to look at what’s underneath first. On a home off Ackerman Road, our techs found a patio door rough opening that had settled three-quarters of an inch out of square with a rotted bottom plate from years of failed weep-hole flashing. That’s a reframe, not a repair, and we told the homeowner before we touched the saw.

Trusted Brands We Service in Kirby

We’re not locked into one manufacturer, which matters when a Kirby home needs a specific size or a specific look. We carry and install Therma-Tru fiberglass entry doors that hold up against Texas sun without warping, ViewLux doors when you want maximum glass and a clean sightline, and PGT and CGI impact-rated units for exterior openings where storm protection matters. If a Kirby customer has a product preference or an existing brand match on other doors in the house, we match it. Stock parts for common Therma-Tru and PGT hardware live on our trucks so we’re not ordering a hinge kit and making you wait a week.

Common Door Replacement Problems We See in Kirby Homes

• Rotted jambs hidden behind hollow-core casings. Kirby’s humidity works its way into unventilated utility rooms and laundry closets, rotting the bottom of interior door jambs where nobody looks until the door droops. The casing often hides it completely until we pull the trim.
• Out-of-square rough openings from slab settlement. Homes built on slab-on-grade in the 1960s settle. A door that was square when Johnson was president is now 1/2 to 3/4 inch out of rack. A replacement slab alone won’t fix it; the opening has to be corrected.
• Aluminum threshold corrosion at concrete stoops. Original concrete front stoops in Kirby trap rainwater against the door threshold. Aluminum corrodes, the seal fails, and summer cooling bills climb. We rebuild the threshold and slope the new one to shed water away from the door.
• Original jalousie or aluminum-frame door openings too shallow for modern units. Kirby homes with original aluminum door frames often have openings too shallow for a modern pre-hung door. We reframe to standard depth rather than shaving a new unit down and voiding its warranty.

Pricing for Door Replacement in Kirby, TX

We Also Serve Cities Near Kirby

Kirby is home base for a lot of our door work, and we also run crews into San Antonio, Fair Oaks Ranch, Windcrest, and Leon Valley. If you’re in any of those spots and need Door Replacement in Kirby-quality workmanship, the same crew, the same written pricing, and the same 365-Day Done Right Promise apply. Call and we’ll schedule the same week.

FAQs About Door Replacement in Kirby