New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows San Antonio pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Door Replacement Across Scenic Oaks
Door replacement in Scenic Oaks typically runs $1,800 to $6,400 for a standard entry door, while oversized custom doors common in Hill Country homes range from $4,500 to $14,000 depending on glass packages and millwork. Most installations we schedule in this area are priced in writing before we order a single component, and lead times on custom sizing, not labor, drive the calendar. If you’re off Boerne Stage Road or tucked into a heavily treed lot near the Guadalupe River, our crews know the roads, the soil conditions, and what your 1990s custom build needs to hold up through July heat and spring thunderstorms. Call (903) 488-7019 for a free estimate on your Door Replacement project.
Why Juniper Windows San Antonio Is Scenic Oaks’s Preferred Door Replacement Company
Scenic Oaks homeowners call us because we treat this area’s specific construction reality as the starting point, not an afterthought. Most of these homes were built between the 1980s and 2000s with large glass expanses facing the Hill Country, and the original doors, often aluminum-framed or builder-grade vinyl, have spent decades absorbing direct sun and clay-driven frame movement. We schedule from the brand’s Dallas-Fort Worth office and dispatch crews locally to Scenic Oaks, so the technician who shows up understands expansive clay soil the way a San Antonio tech might not need to.
Every job is led by Sean Mackey’s team under the 365-Day Done Right Promise. That means the written price covers parts and labor for a full year, and if something isn’t right, we come back and fix it without an argument. Our installers are background-checked, uniformed, and trained to measure for foundation-induced racking before they spec a door size, a step that saves Scenic Oaks homeowners from ordering a unit that jams within a season.
Door Installers in Scenic Oaks
Door installers in Scenic Oaks handle more than swapping a slab into an existing frame. Here, the work starts with checking whether the rough opening has moved since the house was framed. Expansive clay under the Hill Country shifts with rain and drought, and a jamb that looks square at the top may be racked 3/8 inch at the threshold. Our team laser-aligns the opening, notes deflection, and only then orders or fabricates the replacement unit.
Most standard installations in Scenic Oaks run $1,800 to $3,600 for a pre-hung fiberglass or steel entry door with basic hardware. When the opening needs reinforcement, which is common near the northern edge where clay is deeper, expect an additional $400 to $900 for jamb rebuild and hinge-side blocking.
Custom Oversized Doors
Many Scenic Oaks homes have entryways designed to showcase Hill Country views, which means door slabs that run 8 feet tall or wider than a big-box standard. These units are ordered to spec, never cut down from stock. Pricing starts around $4,500 and climbs with glass, finish carpentry, and hardware grade.
Storm-Ready Installation
A door facing open ranch land or the Guadalupe River corridor takes wind loads that a door in a shaded cul-de-sac never sees. We check design pressure ratings and add hinge-side reinforcement so a severe thunderstorm doesn’t tear the door from its frame.
Door Contractors in Scenic Oaks
Door contractors in Scenic Oaks are the ones who coordinate sizing, ordering, and the finish work that makes a replacement look original to the house. On a 1990s custom home with existing architectural millwork, that means matching profiles, casing widths, and stain grades rather than slapping in a pre-finished unit that looks like an afterthought.
Contractor-level projects, the ones involving custom millwork, sidelights, or transoms matched to existing cabinetry, run $5,000 to $14,000 in Scenic Oaks depending on the door line and glass package. For a straightforward entry door on a 2000s production build near Scenic Loop Road, plan on $1,800 to $3,200 installed. The price is fixed in writing before the order goes out, and the 365-day warranty covers the finished installation, parts and labor.
Designer and Architect Coordination
When a Scenic Oaks homeowner is working with a designer on a full entry remodel, we take the spec sheet and handle the rest. We verify the slab thickness, the rough opening after clay movement, and the glazing requirements for west or south-facing exposures. The designer picks the look; we make sure it actually fits the house and the climate.
Long-Lead Scheduling
Custom door lead times in Texas right now run 6 to 14 weeks depending on the manufacturer and glass package. We order the day the written estimate is signed, and we give you a real timeline, not a vague “we’ll call you when it’s in.”
Trusted Brands We Service in Scenic Oaks
We work with Therma-Tru for fiberglass entry systems that hold their finish through Hill Country sun, ViewLux for aluminum-clad and thermally broken units on view-facing elevations, and PGT for impact-rated glazing when the door includes glass panels exposed to wind-borne debris. Because our Scenic Oaks customers often need replacement parts for existing doors, we keep common hardware and weatherstripping in stock for faster turnaround. If you already know you want a specific brand, tell us during the estimate call and we’ll spec the job around it.
Common Door Replacement Problems We See in Scenic Oaks Homes
- Doors that stick or won’t latch after rain. Expansive clay under the slab heaves when wet and shrinks in drought, throwing the jamb out of square. We measure the opening for racking before ordering anything.
- Faded or warped west-facing entry doors. Direct afternoon sun on a door with low-grade vinyl or thin paint will warp and chalk within two or three years. A high-SHGC-rated door with low-E laminated glass is the minimum for west elevations in Scenic Oaks.
- Custom-sized doors replaced with wrong-sized stock units. Many original doors here were built to fit openings that are now 1/4 to 3/8 inch out of square. Ordering a standard 36-by-80 slab without measuring for movement means the new door binds at the latch within months.
- Storm damage to hinge-side connections. Doors facing open Hill Country or the Guadalupe River take serious wind. We check hinge reinforcement and design pressure ratings so the next storm doesn’t blow the door past its stop.
Pricing for Door Replacement in Scenic Oaks, TX
A standard pre-hung entry door replacement in Scenic Oaks runs $1,800 to $3,600 for fiberglass or steel with basic hardware. A Therma-Tru or ViewLux unit with decorative glass and custom casing typically lands between $3,200 and $6,400. Full custom projects with architectural millwork matching, sidelights, or oversized slabs start at $5,000 and reach $14,000. What moves the number in Scenic Oaks specifically: whether the jamb needs reinforcing after clay movement, whether the door faces west and requires high-SHGC glazing, and whether the opening is a stock size or something a builder framed by hand 30 years ago. Every estimate includes a fixed written price before we order, and the 365-Day Done Right Promise covers the install. Call (903) 488-7019 for a line-item quote, free.
We Also Serve Cities Near Scenic Oaks
Beyond Door Replacement in Scenic Oaks, our crews cover San Antonio, Fair Oaks Ranch, Windcrest, and Leon Valley. If you’re just outside the Scenic Oaks boundary, call and we’ll confirm same-week scheduling for your area.
Serving Scenic Oaks, TX - Our Local Coverage Area
We’re based in the Scenic Oaks area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Scenic Oaks
We measure the rough opening with a laser level and note any deflection before ordering or fabricating anything. If the jamb has shifted, we rebuild or reinforce it so the new door swings true, then the written price covers that correction. Call (903) 488-7019 and we’ll come check the opening at no charge.
You want a low SHGC, high-SHGC glazing package with a low-E laminated interlayer. That combination blocks the UV that fades and warps cheap doors, while still letting the view through. We spec PGT or ViewLux glass on west and south elevations for exactly this reason.
Texas does not require Miami-Dade certification for residential entry doors the way Florida does, but if you live on an exposed ridge or near the Guadalupe River, we recommend large-missile-compliant impact glazing anyway. It’s about surviving the next Hill Country hailstorm, not passing a code inspection.
Yes. We take measurements, photos, and a finish sample from your existing casing, then order the door pre-finished or finish it on site to match. This is standard for the 1980s and 1990s custom builds throughout Scenic Oaks where replacing a door with an off-the-shelf unit would wreck the entryway’s character.
A standard in-stock door installs in one day. A custom-sized unit with matched millwork usually takes 6 to 14 weeks from written estimate to final install, mostly waiting on the manufacturer. We give you a real date range and stick to it, because the order goes in the day you sign.
Written by Sean Mackey, Owner at Juniper Windows San Antonio, serving Scenic Oaks and the surrounding Hill Country.
Six Reasons Homeowners Choose Juniper Windows San Antonio
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.