New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows San Antonio pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Converse
Window replacement in Converse typically runs $600 – $1,400 per window installed, depending on whether you need a full-frame replacement or a simpler insert job. Most Converse homes we service were built between 1995 and 2010, which means their original builder-grade windows are now hitting the same failure point at roughly the same time. We’re the local team that understands exactly what those failures look like and what it takes to fix them right. Call (903) 488-7019 for a written, line-item price before any work begins.
Why Juniper Windows San Antonio Is Converse’s Preferred Window Replacement Company
Juniper Windows & Doors has been installing windows since 2001, and the Converse work we do today is a direct response to what this city’s housing stock actually needs. We’re seeing entire subdivisions where the original double-pane units are fogging within three to five years of each other. That’s a pattern, not a fluke, and it changes how we quote and how we install. Sean Mackey, who leads our team, has built the Converse service around one rule: the price we write down is the price you pay. No adjuster at the door, no change order after tear-out.
Converse homeowners tell us the same thing again and again: they’re tired of four-hour arrival windows and vague quotes. So we don’t do either. You get a live arrival time you can track, before-and-after photos of every job, and a digital invoice you can pay from your phone. Every installation is covered by the 365-Day Done Right Promise. If something isn’t right within a year, we make it right. Parts and labor. In writing.
Scheduling and dispatch for Converse are coordinated from our San Antonio office, with crews serving Converse neighborhoods directly. Whether you’re off FM 1516, near Converse North Park, or in the newer subdivisions along Toepperwein Road, we know the streets, the housing stock, and the specific window problems each area tends to produce.
Window Sash Replacement in Converse
Window sash replacement in Converse is the most common job we quote for homes built between 1995 and 2010, where the frames are still structurally sound but the moving sash assemblies have failed. A fogged or binding sash on a Converse home typically costs $350 – $700 per window to replace, depending on size and whether the frame needs re-alignment. Replacing the sash alone often solves the fogging problem without requiring a full tear-out.
When the Sash Is the Problem
Converse’s sun is brutal on aluminum sash components. UV exposure degrades the seals and weatherstripping, and we frequently find sashes that have warped just enough to bind in the jamb. If the frame is square and the jamb isn’t separated, sash replacement is the most cost-effective fix.
What Replacement Includes
Our sash replacement includes removing the failed unit, installing a new low-E sash matched to the existing frame profile, and re-balancing the window. We check design pressure after install, especially on homes in Converse’s wind-exposed subdivisions near open fields along Loop 1604.
Window Glass Repair in Converse
Window glass repair in Converse runs $180 – $450 per pane for most standard double-pane insulated glass units, but the real question for this market is whether you’re repairing one pane or facing an equal-aged bank of windows. Hail impact and seal failure are the two most common repair reasons here, and they require different solutions. A stress crack from hail with no interlayer failure can often be fixed with a single IGU replacement.
Hail Damage and Laminated Glass
We see white chalk adjuster marks all over Converse after storm season, especially in subdivisions like Escondido and Cimarron. The marks document impact, but not every marked window needs replacement. If the glass is pockmarked but the pane is intact, a simple IGU swap works. If the impact compromised the seal or left stress cracks, we recommend upgrading to laminated glass with a large-missile rating so the next storm doesn’t finish the job.
Fogged Glass Units
Fogged insulated glass units are the most common glass repair on Converse homes from the 1995 – 2010 building boom. South Texas UV exposure breaks down the sealant on the spacer bar, and once the desiccant inside is saturated, condensation shows up between the panes. We replace the IGU, not the whole window, whenever the frame is sound.
Trusted Brands We Service in Converse
Juniper stocks and installs eight product lines, including PGT, ECO Window Systems, and Therma-Tru. For Converse specifically, we keep a strong local inventory of PGT impact-rated units because our wind-load and hail-compliance calls are the highest here. We also work with ViewLux and Mr-Glass for homeowners who want specific sightlines or frame colors. If you already have a brand in mind, we can match it. If you’re open to recommendation, we’ll point you to the product that actually fits your exposure and budget, not just the one we have on the shelf.
Common Window Replacement Problems We See in Converse Homes
- Seal failure on original low-E double-pane units. Homes built from 1995 to 2010 in Converse often had builder-grade windows with sealants that don’t hold up to South Texas UV. All the windows start fogging within a few years of each other, which is why we recommend inspecting the whole bank when one goes.
- Hail impact without a laminated interlayer. Many original units in Converse lack a large-missile rated interlayer. Pockmarked glass may look cosmetic, but the next windstorm can turn a small chip into a full stress fracture.
- Settled aluminum frames from the 1990s. Early Converse subdivisions have aluminum frames that shift as the ground settles. Even new sashes can bind and leak air if the frame isn’t re-squared before install.
- Failed design pressure tests during permitting. Converse’s wind-load requirements catch marginal installs. If a window hasn’t been installed to the right design pressure rating, it fails inspection and the homeowner is back to square one.
Pricing for Window Replacement in Converse, TX
A full-frame window replacement in Converse typically runs $800 – $1,400 per opening, including tear-out, new frame, new sash, and trim. Insert window replacement runs $500 – $900 per opening when the existing frame is sound. Energy-efficient upgrades with low-E and argon fill add $100 – $250 per window depending on glass package. Sash replacement runs $350 – $700. These ranges are for this market, not a national average. The single biggest cost variable in Converse is code compliance: impact-rated laminated glass costs more upfront, but it’s what your insurer wants to see. Call (903) 488-7019 for a written quote. The estimate is free, and the number we give you is the number you pay.
We Also Serve Cities Near Converse
Our Window Replacement crews work throughout Converse and the surrounding area. If you’re in San Antonio or Floresville, we cover those markets too. Every job, including Window Replacement in Converse, gets the same written-price standard and the 365-Day Done Right Promise. Call to check availability in your neighborhood.
Serving Converse, TX - Our Local Coverage Area
We’re based in the Converse area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Replacement in Converse
Converse falls under Texas wind-load requirements that demand replacement windows meet a design pressure rating appropriate for inland high-wind zones, and many original builder-grade units from the 1990s and 2000s will not pass a current design pressure test. The specific PSF rating depends on your home’s exposure and location, but we quote Converse jobs to meet or exceed the current code, not just the old standard. Your current windows likely fail if they’re original aluminum frames with single-glazed or early double-pane glass. Call (903) 488-7019 and we’ll check your windows against current Converse requirements during the free estimate.
Chalk marks on Converse windows are adjuster documentation of hail impact, and most of them mean glass repair, not full replacement. If the pane is intact but pockmarked, a single IGU replacement usually resolves it. If the impact left stress cracks or broke the seal, full sash replacement may be the better route. We inspect each marked window and tell you exactly which ones need what, with a written price for each option. Call (903) 488-7019 to schedule a storm-damage inspection.
Impact-rated windows with documented large-missile ratings do qualify many Converse homeowners for wind mitigation insurance credits, but the savings depend on your carrier and policy. We give you the documentation your insurer needs: product ratings, install photos, and a compliance letter. Homeowners in Converse who upgraded after hail claims report meaningful premium reductions, especially when the full window bank is upgraded rather than just the damaged panes. Call (903) 488-7019 and we’ll walk you through what your insurer will ask for.
A cheap quote in Converse often omits the design pressure testing, uses non-impact glass without a laminated interlayer, and leaves old aluminum frames in place without re-squaring. A code-compliant quote includes the correct wind-load rating for your specific exposure, documented glazing that your insurer recognizes, and installation that passes a Converse inspection. The upfront price difference is real, but a failed inspection or an insurance denial after the next hailstorm costs far more. Call (903) 488-7019 for a line-item quote that shows exactly what you’re paying for.
You can replace just one or two windows in Converse and still meet code, as long as the replacement units themselves comply with current wind-load and impact requirements. There is no mandate to do the whole house at once. That said, if your original windows are all from the same era, the others will likely fail soon, and doing them in phases means paying for permit and mobilization more than once. We’ll quote any scope you want, from a single pane to all 14. Call (903) 488-7019 to talk through your options.
Written by Sean Mackey, Owner at Juniper Windows San Antonio, serving Converse and surrounding areas.
Six Reasons Homeowners Choose Juniper Windows San Antonio
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.